The dough pieces have an irregular surface.
Pizza ovens made in italy Fast availability get sales consulting!
ShowroomServicesTrainings & CoursesConsulting
Go to homepage
Categories

Vitella Rundwirker mit Schneckensystem

+ - How is the machine installed?
The machine must be placed on a stable and level floor. The front casters should be locked to secure the machine. The electrical connection must be performed by a qualified technician.
+ - What voltage does the machine require?
The machine comes standard with a 220-volt, 50/60 Hz, single-phase connection. Other voltages are available upon request.
+ - How do I start and stop the machine?
Set the main switch to "I ON" and press the "START" button. To stop, press the "STOP" button. The speed can be adjusted using the "SPEED" potentiometer.
+ - Which types of dough can be used?
It is recommended to use dough with a hydration of at least 70%.
+ - How is the machine cleaned?
Exterior parts: Clean with water and soap or a neutral cleaner. Screw: Clean daily with a brush and, if necessary, water and soap. Cylinder: Remove dough residues with a vacuum and clean with water and soap if needed. Machine interior: Regularly vacuum and clean with a damp cloth if necessary.
+ - The dough is not being shaped continuously.
Use dough with a hydration of at least 70%. Allow the dough to rest sufficiently (approx. 15 minutes).
+ - The dough pieces have an irregular surface.
Reduce the rounding speed. Adjust the speed depending on the dough type and hydration.
+ - The machine does not start.
Check if the screw is correctly installed. Ensure the main switch is set to "I ON."
+ - What is the machine's performance?
Hourly output: 1200 pieces/hour. Cylinder rotations: 16 - 75 rpm. Noise level: < 70 dB. Weight: 97 kg. Dimensions: 968 mm x 550 mm x 705 mm.
+ - What is a rounder with a screw system?
A rounder with a screw system is a machine that automatically shapes raw dough into equal portions. It is suitable for the food industry and can be used in various production lines.

Vitella Teigteiler

+ - What warranty does the manufacturer offer?
The warranty covers only defects that occur during proper operation. Improper use or the use of non-original replacement parts voids the warranty.
+ - What is an automatic dough divider?
An automatic dough divider is a machine that divides a piece of dough into several equal portions. Depending on the model, the dough can be divided into different shapes and weights.
+ - How is the machine installed?
The machine must be placed on a stable and level floor. The electrical connection must be performed by a qualified technician. The machine comes standard with a three-phase connection of 400 volts, 50 Hz.
+ - What safety precautions should be observed?
Unplug the machine before performing maintenance. Do not remove safety guards. Do not perform maintenance while the machine is running. Wear fitted clothing and avoid jewelry or loose hair.
+ - How do I start and stop the machine?
Set the main switch to "I ON" and press the "START" button. To stop, press the "STOP" button or the emergency stop button.
+ - How do I select the working program?
Hold the rotary knob for 3 seconds to select the program. Turn the knob to change the program number and confirm with a press.
+ - How do I adjust the working times?
Hold the rotary knob for 3 seconds to adjust the working times (pressing time, dividing time). Turn the knob to change the values and confirm with a press.
+ - How do I change the number of divisions?
For models with double division, adjust the number of divisions using the rotary knob.
+ - How is the machine cleaned?
Exterior parts: Clean with water and soap or a neutral cleaner. Interior parts: Regularly vacuum and clean with a damp cloth if needed. Cleaning cycle: Select the "CL" program and start the cleaning cycle.
+ - The dough pieces have different weights.
Ensure the dough is placed in the center of the tub and lightly flattened. Adjust the pressing time depending on whether the outer pieces are smaller or larger.
+ - The dough is not being divided.
Check the dividing time and extend it if necessary. Ensure the dough has rested sufficiently (approx. 15 minutes).

Vitella Rundwirker

+ - How is the machine installed?
The machine must be placed on a stable and level floor. The electrical connection must be performed by a qualified technician. The machine comes standard with a three-phase connection of 400 volts, 50 Hz.
+ - What safety precautions should be observed?
  • Unplug the machine before performing maintenance.
  • Do not remove safety guards.
  • Do not perform maintenance while the machine is running.
  • Wear fitted clothing and avoid jewelry or loose hair.
+ - How is the machine cleaned?
Exterior parts: Clean with water and soap or a neutral cleaner. Interior parts: Clean regularly with a damp cloth. Refer to the user manual for detailed cleaning instructions for automatic, semi-automatic, and manual models. Please note the specific guidelines for your model.
+ - How often should the machine be serviced?
Daily cleaning of the work surface and tub edges. Regular maintenance of internal components to ensure a long lifespan.
+ - The dough pieces have different weights.
Ensure the dough is placed in the center of the tub and lightly flattened. Adjust the pressing time depending on whether the outer pieces are smaller or larger.
+ - The dough is not being divided.
Check the dividing time and extend it if necessary. Ensure the dough has rested sufficiently (approx. 15 minutes).
+ - The machine does not start.
Check if the emergency stop button has been pressed. Ensure the main switch is set to "I ON."
+ - What warranty does the manufacturer offer?
The warranty covers only defects that occur during proper operation. Improper use or the use of non-original replacement parts voids the warranty.
+ - What is a dough divider and rounder?
A dough divider and rounder divides a piece of dough into several equal portions and shapes them into small balls. There are three variants:
  • Automatic
  • Semi-automatic
  • Manual.

Coldline

+ - How is the device leveled?
Place the device in its final position and level it using the adjustable feet until it is completely even.
+ - What temperature ranges are available?

  • N: 0°C to +10°C

  • M: -2°C to +8°C

  • B: -18°C to -22°C

  • T: -10°C to -30°C

  • BJ (static/ventilated): -5°C to +10°C / -10°C to -20°C

  • P (Fish): -6°C to +4°C

+ - How is the device cleaned?

  • Remove the PVC film from the interior and exterior surfaces.

  • Clean the interior with a lukewarm, damp sponge and a neutral, chlorine-free cleaning agent.

  • Do not clean the device with a water jet or abrasive cleaners.

+ - What environmental conditions are required?

  • Ambient temperature: 5°C to 43°C.

  • Install the device away from heat sources in a well-ventilated area.

+ - What should be considered during initial setup?

  • Check the voltage and frequency (maximum 10% deviation from the rated value).

  • The electrical system must include a differential switch and grounding.

  • Unplug the power cord during prolonged periods of non-use.

+ - What functions does the control panel have?

  • ▲ Button: Display the highest stored temperature or increase values.

  • ▼ Button: Display the lowest stored temperature or decrease values.

  • Defrost Button: Initiate manual defrost.

  • Setpoint Button: Display or change the setpoint.

  • Light Button: Turn the light on or off.

  • On/Off Button: Turn the device on or off.

  • Lock Button: Lock the keyboard or enter the programming level.

+ - What is the setpoint?
The setpoint is the temperature that the device should maintain within a limit of +2°C.
+ - How to change the setpoint?

  • Press the Setpoint button.

  • Use the ▲ and ▼ buttons to adjust the value.

  • Press the Setpoint button again to save the value.

+ - How does automatic defrost work?
The device defrosts automatically at preset intervals. The duration depends on the amount of ice buildup.
+ - How to start a manual defrost?

  • Press and hold the Defrost button for a few seconds.

  • The LED will light up, and the defrost process will begin.

+ - What alarms are there?

  • P1: Cell sensor error.

  • P2: Evaporator sensor error.

  • HA: High temperature.

  • LA: Low temperature.

  • EE: Memory anomaly.

  • dA: Door open.

+ - How to silence the alarm buzzer?
Press any key to deactivate the alarm buzzer.
+ - How to clean the condenser?

  • Clean the condenser regularly with a soft brush or vacuum cleaner.

  • Be careful not to bend the aluminum fins.

+ - How to clean the seals?

  • Clean the seals regularly with lukewarm water or a bicarbonate solution.

  • Avoid using vinegar, grease removers, or acidic cleaning agents.

Newsletter

Receive exciting news on the topic of pizza oven.
Subscribe now and never miss an action!

We use cookies for the perfect pizza experience 🍕
We use cookies to improve our website, show you personalized content, and optimize your shopping experience. Your consent helps us bring out the best for you.
More information...