High-quality and professional accessories for pizza ovens
Whether pizza shovels, dough kneaders or gas blower burners and flue gas scrubbers - with us you only get original accessories for your high-quality pizza ovens. We will be happy to advise you on the choice of the right products and help you with the selection of equipment such as the dimensions of the dough kneaders or the gas blower burners.
Metal base for Valoriani Hobby This metal base is tailored to the Valoriani Hobby pizza oven. It is available as an option. There are two ways to use the base: 1. the base can be bricked up and covered. This means that the base disappears under a visually appealing custom cladding that fits in with the surroundings. 2. should you use the stove on the base without brickwork, but prefer only a visual but light cladding for the base, the stove is mobile with a lift truck. It therefore remains mobile for use in different places, for example on the terrace in summer and under a bonnet indoors in winter. Translated with www.DeepL.com/Translator (free version)
Ceramic fiber: 96s
Valoriani ceramic fiber wool High quality biosoluble ceramic fiber Insulfrax on rolls (7,32m/0,61m) Total quantity per roll approx. 4.46 QM in 64 density and 25mm thickness this lays directly double-layered on the dome as the first insulation layer. Heat resistant up to 1300 degrees. This ceramic fiber is perfect to ensure long service life for wood-burning stone ovens, because of the perfect heat insulation, slow cooling of the dome parts. For the dome, it is important that the material cools down as slowly as possible, otherwise stresses occur and lead to cracking. The material is suitable for continuous operation and has the advantage that even through moisture and extreme temperature differences it does not lose its insulating properties after a few years as, for example, simple rock wool. Furthermore, a space saving is given due to only half the thickness as rock wool or fiberglass with the same insulation. Required and recommended quantity with additional 2nd Vermucilite backfill: 80cm to 120cm inner diameter of the dome = 1 roll approx. 4,46qmfrom 125cm to 140cm inner diameter = 2 rolls In case of direct plastering on the ceramic fiber with the help of a wire mesh, it is recommended to double the above mentioned quantity (in case of round dome - penultimate picture on the attachment) Price is for complete roll 4,46 sqm of ceramic fiber. User information The health, safety, and environmental properties of the product, including potential health hazards, handling precautions, and emergency procedures are described in a Material Safety Data Sheet. Read this data sheet carefully before handling, storing or using the product.
Format: 55 / 40
Fontana fireclay plate Fireclay plate for Fontana Forni wood burning ovens from Italy, about 12mm thick and made of food grade fireclay thus suitable for direct cooking and baking. The plates of fireclay provide good heat retention and are also suitable for other wood burning ovens, these can also be shortened with a stone disc.
Protective cover: Maestro 60 / Margherita / Ischia / Piero (without trolley)
Fontana protective cover Protective cover for Fontana ovens, available for various wood burning ovens from Fontana Forni, the covers are made of breathable materials and protect your wood burning oven. (Not available at the moment)
Atmospheric gas burner for ValorianiAtmospheric gas burner for semi-professional use and retrofitting or equipping of the FVR, Hobby and Top series for internal sizes 80cm, power 15-20KW with one flame, consumption approx. 1.5/2kg per hour at max. flame. Suitable for propane gas or natural gas. Optionally the model P1 Plus for wood-burning ovens and pizza ovens from 100/110cm inner diameter. The P1 Plus has a higher output and therefore heats up your bread oven faster. Standard configuration is for propane gas, optionally also available with natural gas spraying, please give info when ordering. Also suitable for retrofitting in existing dome ovens, ideal for installation length approx. 20/25cm = base plate 10cm + insulation base plate 10cm + 5cm base dome oven. Please note that a professional installation is necessary and the burner must be installed on site. Download the installation information for the preparation of the lower base as a PDF file.
Valoriani calcium silicate stones Calcium silicate bricks 62,5cm length, 25cm width and 10cm thickness for floor insulation for wood fired stone oven and pizza oven. This should be installed in 1 layer under the floor tiles for home use and in double layer for gastronomic continuous firing. Can be laid in or bonded with tile/chamot mortar. Fireproof up to 1000 degrees, this calcium silicate stone provides perfect insulation for floor tiles. Quantity required: Model 80cm: 8 pieces Model 100/110cm: 10 pieces Model 120cm: 12 pieces Model 110/160cm: 15 pieces
Valoriani fireclay bricks Original Italian firebricks 22cm/11cm/6cm suitable for self-build wood stoves, pizza ovens, fireplaces or bread ovens (firebricks pizza oven). It is fireclay, made from controlled raw materials without chemical additives from the manufacturer Valoriani from Reggello these annual are tested for food safety by an independent institute. Ideal for high thermal loads such as ovens, fireplaces, grills or stone ovens. Price refers to the total quantity of 135 pieces. They are stones of length 220mm, 110cm depth and 60mm height, fireproof up to 1400 degrees. Available in the quantities: 135 pieces = unit price Euro 3,47 incl. VAT 270 pieces = unit price Euro 2,81 incl. VAT 540 pieces = unit price Euro 2,36 incl. VAT Alternatively, we offer sets for the construction of their own pizza oven with fireclay mortar and ceramic fiber insulation. Insulations also available individually in the store.
Isolation (variant): 100 and 110 cm
Valoriani insulation set We offer to the private ovens a perfectly matched set of insulating materials to guarantee a long life of the stone ovens. These sets are available for the FVR and TOP series in sizes from 80cm to 160cm. The insulation sets contain, depending on the size of the oven: Appropriate quantities of special mortar "VAREX" for the outer grouting of the dome elements or for the independent gluing of the base plates. Sufficient quantity of high quality ceramic fiber on rolls (7,3m/0,6m) in 64 density and 25mm thickness which is laid directly on the dome in double layer as the first insulation layer. Heat resistant up to 1300 degrees. Coordinated quantities of high quality vermiculite fill in 100l bags, which is poured directly into the cavity between the walls and onto the dome after the square walling, ensuring perfect insulation and breathability of the furnace. The filling is very light to avoid pressure on the dome.
Valoriani fireclay mortar Tundish Ready-to-use air-binding mortar for pizza ovensCOMPOSITIONBased on raw materials containing silicon. SiO2 80% approx. FIELD OF APPLICATIONJointing and joining of dome parts. Jointing and repair of siliceous refractory and siliceous alumina materials. Jointing of insulating siliceous and siliceous-alumina materials. Ready-to-use air-binding mortar with excellent flowability and load-bearing capacity. Cold bending strength over 25 kg/cm2 dried out 8 hours after application.DELIVERY FORM AND STORAGEPackaging: plastic bucket of kg 20. Storage: 6 months in the original packaging and in fresh but protected from frost. Max. Operating temperature °C 1350
Valoriani Schamottemörtel Varex Ein Keramisch und hydraulisch schnellbindender Feuerfester Mörtel, der im gesamten Temperaturspektrum (von Niedrigtemperatur-Hochtemperaturzonen) eingesetzt wird. Ideal für die Modelle FVR,TOP und Valoriani. Feuerfest bis ca. 1000°C
The insulation for the pizza oven: vermiculite. Only high-quality materials are used for the pizza ovens in our range. However, you can strengthen the performance and energy efficiency of many pizza ovens with a suitable insulation. To do this, the round domes of the pizza ovens are walled square and then filled with the appropriate insulation material. Insulation for the pizza oven is made of vermiculite, a particularly light and efficient insulating material. The advantages of insulation for the pizza oven A good and comprehensively executed insulation of the pizza oven by means of vermiculite not only looks good and can change the whole appearance of the oven. Because there are several other advantages that the insulation brings. The pizza oven works more efficiently, and the risk of injury is also reduced. In addition, thanks to the insulation, the oven can be used indoors. Grain size 4 (0-8 mm), bulk density approx. 75-85 kg/m³Dimension and proportion8,0 - 5,6 mm %5,6 - 3,15 mm %3,15 - 2,0 mm %2,0 - 1,0 mm %< 1,0 mm % Greater efficiency through higher energy storage thanks to vermiculite Another advantage of effective insulation using bulk material is the very effective energy storage of the insulation material. This means that the heat remains in the interior of the kiln and cannot escape further to the outside. This ensures higher efficiency, as the furnace needs to be loaded with less heating material. This factor may sound like a minimal difference at first, but with regular use, this reduction in heating materials can have a significant financial impact. Sooner or later, the cost of insulating the pizza oven will definitely pay for itself. Minimize the risk of injury through insulation for the pizza oven Especially in the catering industry, but also in many normal households, the pizza ovens are used without protective insulation. However, when the pizza ovens burn continuously and have corresponding temperatures inside, part of these temperatures very quickly reach the outside of the oven. A careless movement or an inconsiderate touch later, painful burns occur in the worst case. Especially families with children and professional catering, for these reasons, we always advise a comprehensive insulation for the pizza oven. If it is to be operated indoors, this insulation for the pizza oven is usually mandatory anyway in order to comply with fire safety regulations. How to build an optimal insulation for the pizza oven The basis for optimal insulation for a pizza oven is the structure. As a rule, the round top of the oven is provided with a square wall. It is important to size this correctly so that you do not have to use too much insulation material. Basically, a good 7 cm of space should be left between the furnace top and the wall on the sides of the brick surround. This leaves enough space for the ceramic fiber and the fill layer. Above the copings, you should allow enough space for 10 to 20 cm of insulation layer. The first step in the insulation process is to lay the ceramic fiber tightly around the furnace tops. Here, make sure that the dome is well and comprehensively covered. Now you can put the vermiculite as insulation for the pizza oven between the domes and the brickwork. Make sure that the material is well compacted without exerting too much pressure on the dome. It often helps to just lightly jiggle the material so that it can trickle into the existing gaps. Once the layer has been applied, the walling can be completed. This is why vents must be kept clear Even a modern and efficient insulation for the pizza oven, as offered by us, must follow certain guidelines. For this reason, it is especially important that the insulation is not completely airtight. It may certainly look attractive to plaster the oven or the entire wall afterwards, but you should leave at least two ventilation openings in the wall. Through these, the moisture that accumulates in the insulation material can disperse, so that the stove ventilates effectively on a permanent basis. This not only ensures better results, but also immensely increases the life of the pizza oven. Vermiculite instead of your own tools Again and again one hears from owners of pizza ovens that they do without the "expensive" insulating material and prefer to use sand or gravel from their own garden. What sounds at first like private individuals, unfortunately also occurs in the catering trade again and again. However, the pizza ovens are built in such a way that they have a certain load limit due to the dome shape. Although the ovens are stable and therefore ideally suited for normal operation, if the maximum load is exceeded, problems quickly arise. And anyone who piles up a layer of about 10 to 20 cm of sand on the dome will exceed this load limit extremely quickly. Thus, permanent damage to the oven will occur, just because the rather low price for a good insulation for the pizza oven should not be paid. The advantage of our insulation for the pizza oven When choosing the right insulation material, you need to pay attention to many different factors. Firstly, the weight of the material plays a not insignificant role. If the weight of the insulation is too heavy, the vault of the pizza oven can not compensate for the pressure, so the curvature may collapse. In such a case, the oven would be completely damaged and no longer usable in this form. In addition, the material used must have very good insulating properties.Finally, it is necessary to reduce the temperature transfer to a minimum. The last aspect is also important. Because a good insulation must be able to absorb the ambient moisture. Thus, excessive moisture formation inside the furnace can be prevented. We have chosen a combination of two different materials. First, a ceramic fiber is used, which serves as the first insulation layer. In order to increase its efficiency, the bulk material is now introduced, which has the above-mentioned properties and thus provides perfect insulation for the pizza oven. We will be happy to provide you with comprehensive and personal advice Of course, it is difficult to choose between the various offers in our range. It is important that you get both the right pizza oven and the right insulation material for your requirements and wishes. After all, it is a clear difference whether you want to operate the pizza oven for your family or gastronomically. For this reason, our experts will be happy to assist you by phone and provide you with comprehensive advice. So you can not only find the right insulation for the pizza oven, but with our help and experience, you can also order the appropriate quantities of insulation material. This makes it even easier to provide the optimal insulation and to sustainably increase the efficiency of your pizza oven. Contact us simply and straightforwardly via our contact form or by e-mail and arrange a callback by us with pleasure. We will ensure your satisfaction with comprehensive and professional advice! We are already looking forward to your contact!!!